Canon CR-55 - Manual (Page 27)

Installing the Scanner 23
Turning the Power ON/OFF
Follow the procedures described below when turning the power ON or OFF.
Turning the Power ON
1
Turn ON your computer, Windows starts.
2
Log on as a user with Administrator privileges.
3
Turn ON the scanner.
The power switch is on the rear of the scanner.
Push the power switch to the right to turn ON the scanner. The power
indicator lights green when the power is ON.
WARNING
If the scanner makes a strange noise, emits smoke or a strange odor,
becomes hot, or if the scanner does not operate at all even though
the power is ON, immediately turn the scanner OFF and disconnect
the power cord from the power outlet. Contact your local authorized
Canon dealer or service representative to have the scanner serviced.
4
Windows recognizes the scanner as CANON CR-55 USB and installs the
device driver.
The INF file is installed by the scanning utility. The dialog box that is
displayed depends on the Windows version: