Dell M110 Projector User Manual
Page 34
W
HITE
I
NTENSITY
—Press
and use
and
to display white
intensity.
NOTE:
1
If you adjust the settings for Brightness, Contrast, Color Temperature,
Saturation, Sharpness, Tint, and White Intensity the projector automatically
switches to Custom mode.
2
Saturation, Sharpness, and Tint are only available when input source is from
A/V in.
D
ISPLAY
S
ETTINGS
(I
N
PC M
ODE
)—
Select and press
to activate display settings.
The display settings menu provides the following options:
H
ORIZONTAL
P
OSITION
—Press
to move the image right and
to
move the image left.
V
ERTICAL
P
OSITION
—Press
to move the image up and
to move
the image down.
F
REQUENCY
—Allows you to change the display data clock frequency to
match the frequency of your computer’s graphics card. If you see a
vertical flickering wave, use the Frequency control to minimize the
bars. This is a coarse adjustment.
T
RACKING
—Synchronize the phase of the display signal with the
graphic card. If you experience an unstable or flickering image, use
the Tracking to correct it. This is a fine adjustment.
A
SPECT
R
ATIO
—Allows you to select the aspect ratio to adjust how the
image appears. Options are: Origin, 16:9, and 4:3.
• Original — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
• 16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
Using Your Projector
34