Dell M110 Projector - Manual (Page 29)

Using the On-Screen Display
• The projector has a multi-language On-Screen Display (OSD) Menu that can be
displayed with or without an input source.
• Press the Menu button on the control panel or the remote control to enter the
Main Menu.
• To select an option, press the or buttons on your projector’s control panel
or remote control.
• Use the or buttons on the control panel or remote control to adjust the
settings.
• To exit the OSD, press the Menu button directly on the control panel or the
remote control.
INPUT SOURCE
The Input Source menu allows you to select your projector's input source.
A UTO S OURCE — If you select and press
to activate, the Auto Source option
will automatically find the next available
input source.
VGA— Press to detect a VGA signal.
D O USB— Allows you to display the
computer/laptop screen to your
projector via the USB cable.
NOTE: When you connect the projector and computer via the USB cable, a
USB Connected message will pop up and allow you to select input sources as
DoUSB or Storage.
Using Your Projector 29