Dell Precision M2300 (Late 2007) - Manual (Page 12)

10. From the back of the computer, remove the two M2.5 x 8-mm screws.
11. From the bottom of the computer, remove the two M2.5 x 8-mm screws labeled "D."
12. Turn the computer top-side up and open the display.
13. Lift the display assembly out of the computer base.
Removing the Display Bezel
1. Follow the instructions in Before You Begin .
2. Remove the display assembly (see Display Assembly ).
3. Use a plastic scribe to pry the six rubber screw-covers/display-bumpers out of the screw holes on the front of the bezel.
1 antenna cables (2) 2 display cable pull-tab
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as a connector on the back of the computer.