Dell LCD TV W2600 - Manual (Page 30)

Using the On-Screen Display
31
OSD Setup
OSD setup allows you to adjust the appearance of the OSD, set the channels when in TV mode,
change the language of the OSD (see "Selecting Your OSD Language" on page 26), and restore
factory settings.
Use OSD Hold Time to increase or decrease the amount
of time the OSD appears. The maximum amount of time
is 60 seconds.
In the OSD Setup menu, you can select TV Button Lock
to lock the buttons on the side panel. When this option is
enabled, only the power button functions. Hold the
volume increase and the channel increase buttons
together for 10 seconds to unlock the buttons.
If you are using the DVI connector, you may need to verify
the following settings:
Source — The default setting is Auto. The TV automatically detects if a computer (PC) or video
device is being used. If the image does not display correctly, you can select the source, PC or Video,
depending on the device you are using.
Color — The default color space is RGB. If the colors are not displaying correctly, you can change
the setting to YUV.
Card Reader
A card reader allows you to view digital photos on your TV.
Your card reader supports the following card types:
• Compact Flash
• Secure Digital
• Memory Stick
FACTORY RESET
LANGUAGE
CHANNENL SETUP
OSD SETTING
BACK
DVI SETTINGS
SETUP
MAIN MENU
EXIT INPUT
SELECT IMAGE
MGMT PICTURE COLOR
SETTINGS
PIP/POP
PBP SIZE SETUP
W2600A00.book Page 31 Friday, July 2, 2004 2:36 PM