Dell Dimension 4600C - Manual (Page 16)

down your computer, turn them off now.
3. Disconnect any telephone or telecommunication lines from the computer.
4. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.
5. Remove the computer stand , if it is attached.
6. Open the computer cover .
7. Press out the securing clip at each end of the memory module connector.
8. Grasp the module and pull up.
If the module is difficult to remove, gently ease the module back and forth to remove it from the connector.
9. Close the computer cover .
10. Attach the computer stand (optional).
Back to Contents Page
NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.