Dell Inspiron 23 (2350, Mid 2013) - Manual (Page 74)

Removing the Power-Button
Module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover .
2 Remove the computer base .
3 Remove the back cover .
Procedure
NOTE: Note the routing of the cable as you remove it so that you can
reroute it correctly after you replace the power-button module.
1 Note the power-button cable routing and remove it from the routing
guides.
2 Remove the screw that secures the power-button cable to the display
bracket.
3 Disconnect the power-button cable from the control-buttons board
cable.
4 Peel off the Mylar that covers the power button.
74