Dell Inspiron 23 (2350, Mid 2013) - Manual (Page 45)

Replacing the USB Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw hole on the USB board with the screw hole on the
computer base.
2 Replace the screw that secures the USB board to the computer base.
3 Route the USB-board cable through the routing clip on the computer
base and close the routing clip.
4 Connect the USB-board cable to the connector on the USB board.
5 Adhere the USB-board cable to the USB board.
Post-requisites
1 Follow the procedure from step 5 to step 8 in “Replacing the Hard Drive ”.
2 Replace the computer base .
3 Replace the base cover .
45