Dell Inspiron 23 (2350, Mid 2013) - Manual (Page 43)

Removing the USB Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover .
2 Remove the computer base .
3 Follow the procedure from step 1 to step 4 in “Removing the Hard Drive ”.
Procedure
1 Peel off the tape from the USB-board cable.
2 Open the clip of the USB-board cable routing.
3 Using the pull tab, disconnect the USB-board cable from the USB board
and remove it from the cable-routing clip.
4 Remove the screw that secures the USB board to the computer base.
43