Dell S300wi Projector - Manual (Page 68)

68 Using Your Projector
T EST P ATTERN — Test Pattern is used to test focus and resolution.
You can enable or disable the Test Pattern by selecting Off, 1 or 2. You can also
invoke the Test Pattern 1 by pressing and holding down and buttons on the
control panel simultaneously for 2 seconds. You can also invoke the test pattern 2
by pressing and holding down and buttons on the control panel
simultaneously for 2 seconds.
F
ACTORY
R
ESET
— Select and press to reset all settings to its factory default, the
warning message below appears.
Reset items include both computer sources and Video source settings.
Test Pattern 1:
Test Pattern 2: