Dell S300wi Projector - Manual (Page 54)

54 Using Your Projector
L ANGUAGE —Allows you to set the language for the OSD. Press to activate the
Language menu.
P ROJECTOR M ODE —Allows you to select the projector mode, depending upon how
the projector is mounted.
• Front Projection-Desktop — This is the default option.
• Front Projection-Wall Mount — The projector turns the image upside
down for wall-mounted projection.
• Rear Projection-Desktop — The projector reverses the image so that you
can project from behind a translucent screen.
• Rear Projection-Wall Mount — The projector reverses and turns the image
upside down. You can project from behind a translucent screen with a wall-
mounted projection.
NOTE: Enabling the Interactive function is NOT recommended in the rear
projector modes.
V. K EYSTONE —Manually adjust the vertical image distortion caused by tilting the
projector.
3D DISPLAY—Select on to start the 3D display function. Default is off.