Dell PowerEdge C8000 - Manual (Page 10)

10 Installation Guide
13 Align and insert the MIC card assembly into the front GPGPU card riser connector until the
card is fully seated.
14 Secure the MIC card to the front of the sled cover using the four M3 screws, working in a
clockwise sequence. Tighten the screws to 5.21 in-lbs.
Figure 1-8. Installing the Front MIC Card Assembly
15
Align the left air baffle with the screw holes on the front of the sled cover.
16 Secure the left air baffle to the sled cover using the two M3 screws. Tighten the screws to
5.21 in-lbs.
Figure 1-9. Installing the Left Air Baffle
1 M3 screws (4) 2 MIC card assembly
3 front GPGPU card riser
1 left air baffle 2 M3 screws (2)
3 MIC card assembly
2 3
1
1
2
3
C8220X_MIC5110P7120P_IG.book Page 10 Monday, August 12, 2013 5:42 PM