Dell POWEREDGE M1000E - Manual (Page 3)

InfiniBand Blade Switch I/O Module for PowerEdge M-Series Rev 1.0
Mellanox Technologies 3
Contents
Contents 3
Revision History 4
About this Manual 5
Chapter 1 Overview 7
1.1 InfiniBand Connectors 8
1.2 Switch Status Lights 9
1.3 I2C Interface RJ-45 Connector 10
Chapter 2 Installation and Basic Operation 11
2.1 Installation Safety Warnings 11
2.2 Mechanical Installation 13
2.2.1 Removing an Old Switch From the Chassis 13
2.2.2 Removing an I/O Module Blank From the Chassis 14
2.2.3 Installing the Mellanox M4001[F, Q] Switch Into the Dell Chassis 14
2.3 Power Connections and Initial Power On 14
2.4 InfiniBand Cable Installation 14
Chapter 3 Cluster Management and Firmware 16
3.1 Network Management and Clustering Software 16
3.2 Updating Firmware 16
3.2.1 Instructions for Reprogramming Over the InfiniBand Network 16
Chapter 4 Troubleshooting 17
Appendix A Specifications 18
Appendix B EMC Certification Statements 20
Appendix C QSFP Interface 23
Appendix D Avertissements de sécurité d’installation 25
Appendix E Installation - Sicherheitshinweise 27