Casio PA-2500 - Manual (Page 16)

16
Setup at H/PC
Execute "Run by specifying the file name" from the Start menu on the H/PC.
Fig. 3.11 H/PC File Name Specification Screen
Enter the following commands, according to the connection method used with the host PC, and click
on the [OK] button. The following example command assumes that the "C:
a.dat" file on the PC is
received under the "
" directory on the H/PC side.
If I/O Box is used :
Windowsflce.exe /r "C:a.dat" ""
If RS-232C cable is used:
Windowsflce.exe /Y={com1, 115200, } /r "C:a.dat" ""
Creation of the above described shortcut enables start-up from the shortcut.
If the [OK] button is clicked on, the following screen appears.
Fig. 3.12