Casio PA-2500 - Manual (Page 14)

14
Setup at H/PC
Execute "Run by specifying the file name" from the Start menu on the H/PC.
Fig. 3.8 H/PC File Name Specification Screen
Enter the following commands, according to the connection method used with the Host PC, and
click on the [OK] button.
If I/O Box is used :
Windowsflce.exe
If RS-232C cable is used:
Windowsflce.exe /Y={com1, 115200, }
Creation of the above described shortcut enables start-up from the shortcut.
If the [OK] button is clicked on, the following screen appears.
Fig. 3.9