Module cover, Removing the module cover, Replacing the module cover – Dell Vostro A860 (Late 2008) User Manual
Page 2
Back to Contents Page
Module Cover
Dell™ Vostro™ A840/A860 Service Manual
Removing the Module Cover
1.
Follow the procedures in
"Before You Begin" on page 9
.
2.
Turn the computer over.
3.
Remove the two screws from the module cover.
4.
Lift the module cover away from the computer.
Replacing the Module Cover
1.
Replace the module cover.
2.
Replace the two screws on the module cover.
3.
Slide the battery into the battery bay, until it clicks into place.
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
1
module cover screw (2)
2
module cover