beautypg.com

Key combinations, Controls and lights, Power – Dell OptiPlex SX270N User Manual

Page 97: Physical, Environmental

background image

 

Video

 

DVI-I connector on the back I/O panel

 

Integrated network adapter

 

RJ45 connector on the back I/O panel; 10/100/1000

 

PS/2-style keyboard

 

6-pin mini-DIN on the back I/O panel

 

PS/2-compatible mouse

 

6-pin mini-DIN on the back I/O panel

 

USB

 

four USB 2.0-compliant connectors on the back I/O

panel; two on the front panel

 

Internally accessible:

 

Primary IDE hard drive

 

44-pin connector

 

Fans

 

two 4-pin connectors

Key Combinations

 

 

restarts (reboots) the computer

 

<\>

 

toggles microprocessor speeds on 101-key keyboard

(in MS-DOS® real mode only)

 

<#>

 

toggles microprocessor speeds on 102-key keyboard

(in MS-DOS real mode only)

 

or

 

starts embedded system setup (during start-up only)

 

 

automatically starts the computer from the network

environment specified by the remote boot
environment (PXE) rather than from one of the
devices in the system setup Boot Sequence option
(during start-up only)

 

or

 

displays a boot device menu that allows the user to

enter a device for a single boot (during start-up only)
as well as options to run hard-drive and system
diagnostics

 

 

launches the utility partition (if installed) during

computer start-up

Controls and Lights

 

Power control

 

push button

 

Power lights

 

green light on power button—blinking green in sleep

state; solid green for power-on state

 

amber light—blinking amber indicates a problem with

an installed device; solid amber indicates an internal
power problem (see "

Power Problems

")

 

Hard-drive access light

 

green light

 

Link integrity light (on integrated network adapter)

 

green light for 10-Mb operation; orange light for 100-

Mb operation; yellow light for a 1000-Mb (1-Gb)
operation

 

Activity light (on integrated network adapter)

 

yellow blinking light

 

Diagnostic lights

 

four yellow and/or green lights on back panel

 

Standby power light

 

12V_PWR on the system board

Power

 

External DC power adapter:

 

Wattage

 

150 W

 

Heat dissipation

 

455 BTU/hr (average)

 

Voltage

 

90 to 135 V at 60 Hz; 180 to 265 V at 50 Hz

 

Backup battery

 

3-V CR2032 lithium coin cell

Physical

 

Vertical orientation width, depth, and height (without

stand or cable cover)

 

3.4 inches (8.5 cm), 9.7 inches (24.2 cm), 9.9 inches

(24.7 cm)

 

Vertical orientation width, depth, and height (with

stand)

 

3.4 inches (8.5 cm), 9.7 inches (24.2 cm), 10.9 inches

(27.2 cm)

 

Vertical orientation width, depth, and height (with

stand and cable cover)

 

3.4 inches (8.5 cm), 12.1 inches (30.2 cm), 10.9

inches (27.2 cm)

 

Horizontal orientation width, depth, and height

(without stand or cable cover)

 

9.9 inches (24.7 cm), 9.7 inches (24.2 cm), 3.4 inches

(8.5 cm)

 

Weight (without stand or cable cover)

 

7.2 lbs (3.3 kg)

 

Weight (with stand and cable cover)

 

8 lbs (3.6 kg)

Environmental

 

Temperature:

 

Operating

10° to 30°C (50° to 86°F)

 

Storage

 –40° to 65°C (–40° to 149°F)

 

Relative humidity

 

20% to 80% (noncondensing)

 

Maximum vibration:

 

Operating

 

desktop or vertical hanging orientation: 0.25

gravities (G) at 3 to 200 Hz at 0.5 octave/min;
horizontal orientation: 0.25 G at 20 to 200 Hz at 0.5
octave/min