beautypg.com

Back-panel connectors, Connecting a vga monitor – Dell OptiPlex SX270N User Manual

Page 12

background image

 

Back-Panel Connectors

 

 

Connecting a VGA Monitor

 

If you have a VGA Monitor, plug the VGA-DVI adapter into the DVI connector and connect the monitor cable to the adapter as shown.

 

1  computer cover/hard-drive release

button

 

Press this button toward the cover release icon to remove the cover, or press this button toward the hard-drive

icon to release the hard drive.

2  

back-panel connectors

 

The connectors for your computer.

3  power connector

 

The connector for the power adapter.

4  diagnostic lights

 

See "

Diagnostic Lights

" for a description of light codes that can help you troubleshoot problems with your

computer.

1

 

parallel

connector

 

Connect a parallel device, such as a printer, to the parallel connector. If you have a USB printer, plug it into a USB connector.

2

 

link integrity

light

l

 

Green — A good connection exists between a 10-Mbps network and the computer.

l

 

Orange — A good connection exists between a 100-Mbps network and the computer.

l

 

Yellow — A good connection exists between a 1000-Mbps (1-Gbps) network and the computer.

l

 

Off — The computer is not detecting a physical connection to the network or the Network Controller is turned off in system

setup.

3

 

network

adapter

 

Attach the UTP cable to an RJ45 jack wall plate or to an RJ45 port on a UTP concentrator or hub and press the other end of the UTP

cable into the network adapter connector until the cable snaps securely into place.

 

Dell recommends the use of Category 5 wiring and connectors for our customers' networks.

4

 

network activity

light

 

The yellow light flashes when the computer is transmitting or receiving network data. A high volume of network traffic may make this

light appear to be in a steady "on" state.

5

 

power

connector

 

The connector for the power adapter.

6

 

mouse

connector

 

Plug a standard mouse into the green mouse connector. Turn off the computer and any attached devices before you connect a

mouse to the computer. If you have a USB mouse, plug it into a USB connector.

 

If your computer is running Windows 2000 or Windows XP, Dell installed the necessary mouse drivers on your hard drive.

7

 

line-out

connector

 

Use the green line-out connector to attach an amplified speaker set.

8

 

line-in connector  Use the blue line-in connector to attach a record/playback device such as a cassette player, CD player, or VCR.

9

 

keyboard

connector

 

If you have a standard keyboard, plug it into the purple keyboard connector. If you have a USB keyboard, plug it into a USB

connector.

10  USB connectors

(4)

 

Connect USB devices such as a mouse, keyboard, printer, joystick, and computer speakers into any of the USB connectors.

11  video connector  If you have a DVI-compatible monitor, plug the cable from your monitor into the white connector on the back panel.

 

If you have a VGA monitor, see "

Connecting a VGA Monitor

."

12  serial connector  Connect a serial device, such as a handheld device, to the serial connector.