Dell PowerVault 725N (Rackmount NAS Appliance) - Manual (Page 9)

Upgrading Your 39160 SC SI Card Firmware 1-7
6 Create a new user with the name pv725 and the password set to password:
a From the desktop of your client system, right-click My Computer, and then select
Manage.
b On the left side of the Computer Management window, double-click Local Users
and Groups.
c Right-click Users and select New User.
d In the New User window, type pv725 as the user name.
e Type password in Password, and type it again in Confirm password.
f Click User must change password at next logon to clear the check box.
g Click Create, and then click Close.
7 Create a share for the SCSI firmware on the client system:
a If not already logged in, log in to the client system with an account that has
administrator privileges.
b Download the new SCSI firmware and utilities from support.dell.com and place
them in a directory on your client system.
Ensure that both 39160.rom and flash4.exe are downloaded into this directory.
c Double-click My Computer and browse to the directory where you downloaded
the firmware.
d Right-click this directory, and select Sharing.
e Click Share this folder.
f Type SCSI for the name of the share, and then click OK to confirm the share
settings.
8 Install the Dell Reinstallation Console from the Resource CD:
a Insert the Resource CD into the CD drive of your client system.
The Dell PowerVault 725N Resource CD screen displays in a browser window.
NOTE: If the CD does not run automatically, double-click the start.bat file on the CD.
b Click Resources.
c Click Install Reinstallation Console.
d When the File Download window displays, click Open this file from its current
location, and then click OK.
e Click Next and follow the instructions on the screen.
f When prompted to reboot the client system, click Yes.