Dell Latitude 2100 (Mid 2009) - Manual (Page 26)

Back to Contents Page
Display Panel
Dell™ Latitude™ 2100 Service Manual
Removing the Display Panel
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery from the computer.
3. Remove the keyboard from the computer.
4. Remove the access panel from the computer.
5. Remove the display assembly from the computer.
6. Remove the display bezel from the display assembly.
7. Disconnect the display LED board data cable from the display LED board.
8. Loosen the captive ground cable screw.
9. Remove the four screws that secure the display panel to the display assembly.
10. Remove the display panel from the display assembly.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.