Ac adapter connector, Removing the ac adapter connector – Dell Inspiron Mini 10 (1012, Late 2009) User Manual
Page 13
Back to Contents Page
AC Adapter Connector
Dell™ Inspiron™ 1012 Service Manual
Removing the AC Adapter Connector
Replacing the AC Adapter Connector
Removing the AC Adapter Connector
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Follow the instructions from
step 2
to
step 17
in
Removing the System Board
.
4.
Remove the left support bracket (see
Removing the Left Support Bracket
).
5.
Remove the I/O board (see
Removing the I/O Board
).
6.
Make a note of the AC adapter connector cable routing and remove the cable from the routing guide.
7.
Lift the AC adapter connector out of the computer base.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
AC adapter connector