Dell PowerEdge C5125 - Manual (Page 15)

15
Table 1-5. Blinking Fault LED Conditions
Index Sensor Name Event Triggers
1 CPU0_Temp, • Upper Critical Going High.
• Upper Non-Critical Going High.
Ambient0_Temp,
DIMM Local Temp,
Rear Temp 1
Rear Temp 2
Rear Temp 3
2 BMC Watchdog • Time expired
• Hard reset
• Power down
• Power cycle
3 Processor Thermal trip
4 BMC SEL • SEL almost full
• SEL Full
5 Processor Hot State Asserted
6 POST Error System firmware error
7 Critical Interrupt PCI SERR
8 DIMM-A0 • Correctable error
• Uncorrectable error
• Correctable ECC error logging limit reached
DIMM-B0
DIMM-A1
DIMM-B1
9 SYS FAN 1 ~
SYS FAN 8
• Lower critical going low
• Lower non-critical going low
10 PSU 1 Status
PSU 2 Status • Presence detected
• TEMPERATURE Failure detected
• IOUT Failure detected
• VOUT Failure detected
• FANS Failure detected
• INPUT Failure detected