Dell PowerVault MD3800i User Manual

Page 8

Function

Command

To enable or disable
service location
protocol (SLP)

# cimconfig -s slp={true | false} -p

NOTE: If SLP is enabled, see the table below for additional settings information.

NOTE: Commands are of the following format: cimconfig -s
={true|false} -p where

is a column

heading in the following table.

Table 1. Additional Setting Information if SLP is Enabled

propertyName

runinternal

PegasusSLP

runinternal

PegasusSLP

registerExter

nal

PegasusSLP

register

Multiple SLP

Behavior

true

false

Internal Pegasus SLP is
started when cimserver
starts.

false

true

false

External Pegasus SLP
registration runs in
cimserver with a
default registration
timeout set to 3 hours
(same as the SLP
default timeout).

false

true

false

External OpenSLP
registration is run in
CIM server.

false

true

External OpenSLP
registration is
attempted and falls
back to external
Pegasus SLP
registration if it fails
(default setting).

false

true

false

true

External Pegasus SLP
registration is
attempted and falls
back to external
OpenSLP registration if
it fails.

NOTE: All other combinations of the SLP property values have undefined behavior.

For more information, see the documentation available in the source release archive at openpegasus.org.