Dell Latitude D631 (Early 2009) - Manual (Page 42)

1. Peel the backing off the thermal cooling pad and adhere the pad to the portion of the thermal-cooling assembly that covers the processor.
2. Place the assembly on the system board.
3. Tighten in consecutive order the four captive screws, labeled "1" through "4," on the thermal-cooling assembly.
4. Replace the palm rest (see Palm Rest ).
5. Replace the keyboard (see Replacing the Keyboard ).
6. Replace the hinge cover (see Hinge Cover ).
7. Replace the media bay device (see Media Bay Devices ).
8. Replace the battery.
Back to Contents Page
NOTE: If necessary, ensure that you reconnect the coin-cell battery (see Coin-Cell Battery ) before you replace the keyboard.