Changhong Electric TM201F7U - Manual (Page 18)

PAGE 16
● CCD
Press 【CC】to see this menu, you can select
the desired option among CC1~CC4、T1~T4 and
OFF with 【CH+】/【CH-】, and confirm that by
pressing【OK】
. ● Favorites
Press 【FAVOR】to see this menu on the right,
these are the details:
1. Mode：including Auto and Manual. They are respectively stored in Air or Cable way；
2. In Auto mode，the TV would store the available channel name input with the numeric
buttons to Favorite Channels every time orderly, what is more, it only save the latest five
channel names of availability (without repeat);
3. In Manual mode，select different Sort with【CH+】/【CH-】, then you can channel of each
sort by 【CH+】/ 【CH-】or number buttons( in Air way, 2-69 are available; in Cable way, 1-125
are available).
In Auto mode， 【Vol+】/【Vol-】are invalid while 【CH+】/【CH-】and【OK】can still work.
● Recall
In TV mode, press【RECALL】on the remote control to view the previous channel .
In other signal sources, press【RECALL】on the remote control to view the previous signal
source.
● Signal Switch
Press【SOURCE】on the remote control to display the source menu and select the signal
source. They are TV、AV、S-VIDEO、YPbPr and PC. Press【CH+】/【CH-】to select the
different signal source; Press 【Vol+】/【OK】 to enter into the selected signal source; Press
【SOURCE】again to remove the source menu.
● Channel Switch
Use the number buttons to choose the desired channel directly or press【CH+】/【CH-】
on the panel or the remote control to increase/decrease the channel number. If a channel
number is in Skip On mode, the next channel will display orderly.
A maximum of 3 digits can be keyed in at one time with the number button on the remote
control. The symbol of “ - - ” on the upper-right corner represents tens and one
respectively.. ,two digits are only admitted if a number input is beyond the range and the
number for hundred digit is bigger than “2”.The first input number is for hundreds, if it is
“1”,“1- -”appears on. The TV will switch to channel 1 if no number is input in 3 seconds.
The second is for tens if it is “2”,“12 -”appears on. The TV will switch to channel 12 if no
number is input in 3 seconds and the third is for ones., Press 【OK】to turn to the desired
channel quickly after the corresponding number is input.