beautypg.com

Changhong Electric TM201F7U User Manual

Page 15

background image

PAGE 13

Antenna

.To display the RF antenna mode, when this mode is Air, Auto Search begins searching

from channel 2 to channel 69; When this mode is Cable, Auto Search begins from channel

1 to channel 125. Then what have searched before would be stored in the corresponding

EEPROM, meanwhile, the channels which have not been searched will be set to Erase

mode automatically.

Auto search

Three situations for Auto Search to stop:

1. The TV does auto search and stores programs .

2. 68-program or 125-program positions are all occupied

3. you want to stop it by pressing 【MENU】/【Vol-】 during the search process.

After the situation 3 happened, the search will automatically stop and back to the first

channel, furthermore , the TV would return to the Tune menu.

Name

Rename the program with four colored buttons on the remote control
【Red】for Capitalized English letters
【Green】for Alphanumeric numbers from 0 to 9
【Yellow】for special characters as “#”
【Blue】Resuming “*” in unnamed mode

Use【V+】/【V-】to input and select the characters

Note: There is a PC Setup menu for the Tune menu in PC signal source; There is no Tune

menu in AV、S-Video、YPbPr signal source.

Clock

Clock

The current actual time can be input by pressing

the number buttons(0-9) and 【Vol+】/【Vol -】.

Antenna

To

display RF antenna mode.

Time/ Off Time

The function of can be effectual only when Time/

Off Time is not off. Press the number buttons and 【Vol+】/【Vol-】to adjust the time.

Press【CH+】/【CH-】to select these options in Clock such as Time、Channel、Off Time

in cycle, Press【Vol+】/【Vol-】to set the corresponding value.

1 Whenever the main power is on, the clock item always displays “12:00AM”,only use

【Vol+】/【Vol-】to switch between AM and PM and use numeric buttons to modify the time.

2.To set Time/Off Time among Off/Once/Always with 【Vol+】/【Vol-】in cycle. Off

indicates this function is not available. Once indicates one time for On Mode, after then it
would be adjusted to Off automatically.

3.This function can only be available when the main power supply is proper, otherwise,

it can not be done and automatically adjusted to Off.

4. Of Clock、Time and Off Time, “Minute”ranges from 00 to 59,

“Hour”is 1~12(AM),

This manual is related to the following products: