Dell 3010cn Color Laser Printer - Manual (Page 10)

TCP/IP
Purpose:
To specify the TCP/IP settings.
The change becomes effective after the printer is turned off and then on again.
Values:
Protocol
Purpose:
To enable or disable each item.
The change becomes effective after the printer is turned off and then on again.
Values:
100Base Full
Uses 100base-TX full-duplex.
IP AddressSetup AutoIP*
Automatically sets the IP address.
BOOTP
Uses BOOTP to set the IP address.
RARP
Uses RARP to set the IP address.
DHCP
Uses DHCP to set the IP address.
Panel
Enables the IP address entered on the operator panel.
IP Address
Displays the IP address allocated to the printer by using the keys on the operator panel.
Subnet Mask
Displays the subnet mask.
Gateway Address
Displays the gateway address.
LPD On*
Enables the LPD port.
Off
Disables the LPD port.
Port9100 On*
Enables the Port9100 port.
Off
Disables the Port9100 port.
FTP On*
Enables the FTP port.
Off
Disables the FTP port.
SNMP UDP On*
Enables the UDP.
Off
Disables the UDP.
E-Mail Alert On*
Enables the E-Mail Alert feature.