Char-Broil 463222209 User Manual

Page 21

Insert sideburner burner into left shelf.
shelf, shown A.

The stud on bottom of burner fits into rear small hole in sideburner drip pan on

Secure burner to sideburner drip pan with one Wing nut, shown B.Make sure burner tube engages

sideburner valve, shown C.

Sideburner burner

Sideburner drip pan

Burner tube

lve

Wing nut

Qty.1

First, remove the two screws and lock washers already attached to the sideburner valve bracket. Position sideburner

valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes

on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.

Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on

fascia. Attach using two #8-32x3/8” screws and 4mm lock washers. Press sideburner control knob onto valve stem.

Screws and Washers

removed from valve bracket

Note: Use upper and lower

holes on fascia to

attach bezel

Sideburner

valve bracket

Valve stem

Screw

Lock washer

Control knob bezel

#8-32x3/8” screw

Qty.2

4mm

4mm lock washer

lock washer

Valve stem

Sideburner

shelf fascia

Sideburner control knob