Clearing forgotten passwords – Dell Dimension 3000 User Manual

Page 86

Appendix

4 At the bottom of the menu, enter the number of the device that is to be used for the current boot only.

For example, if you are booting to a USB memory key, highlight USB Flash Device and press
.

NOTE:

To boot to a USB device, the device must be bootable. To make sure that your device is bootable, check the

device documentation.

Changing Boot Sequence for Future Boots

1 Enter system setup (see page 80).
2 Use the arrow keys to highlight the Boot Sequence menu option and press to access the

menu.

NOTE:

Write down your current boot sequence in case you want to restore it.

3 Press the up- and down-arrow keys to move through the list of devices.
4 Press the spacebar to enable or disable a device (enabled devices have a checkmark).
5 Press plus (+) or minus (–) to move a selected device up or down the list.

Clearing Forgotten Passwords

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the

Product Information Guide.

1 Follow the procedures in "Before You Begin" on page 45.

PSWRD