Dell Inspiron 5000e - Manual (Page 7)

support.dell.com Dell Inspiron 5000 Port Replicator User’s Guide 1-3
1. Refer to Figure 1-1 to attach external devices to the appropriate connectors on
the back of the port replicator.
NOTES: If the cable connector from the external device has thumbscrews, be
sure to tighten them to ensure a proper connection.
To connect the computer to a network, you must have a network card in your
computer. The advanced port replicator has a network card, so another card is
not required. However, the pass-through port replicator does not have a network
card so you must install a network card in your computer.
The port replicators do not provide small computer system interface (SCSI) sup-
port. To connect the computer to a SCSI device, you must attach a SCSI card to
your computer. See “PC Cards” in the system Help for information about using
PC Cards.
For detailed information on using external devices with your computer, see “Con-
necting External Devices” in the system
Help.
2. Connect the external devices to an electrical outlet, if applicable.
&RQQHFWLQJWKH&RPSXWHUWRWKH3RUW
5HSOLFDWRU
1. Save all open files, and exit all open application programs.
2. Shut down the computer.
3. If you have not already done so, connect the AC adapter to the connector on the
port replicator (see Figure 1-1), and plug the AC power cable into an electrical outlet.
)LJXUH$WWDFKLQJ([WHUQDO'HYLFHVWRWKH3RUW5HSOLFDWRU
PS/2 mouse connector
keyboard connector
dual USB connector
serial port connector
parallel port connector
monitor connector
line-out connector
line-in connector
microphone connector
AC adapter connector
NIC connector
(APR only)
SPDIF connector
TV-out S-video connector