Dell OptiPlex 580 (Early 2010) - Manual (Page 34)

l Off
TPM Security Enables or disables the TPM security feature.
l On
l Off (default)
TPM Activation Activates or deactivates the TPM feature if it is enabled.
l Enable
l Disable
l Don't Change
Power
AC Recovery Specifies the behavior of the system when AC power is restored after an AC power loss.
l Off (default)
l On
l Last
Auto Power On Enables the Auto Power On feature
l Disabled (default);
l Enabled
Remote Wake Up Specifies if your computer can be turned on.
l Disabled
l Enabled (default)
Low Power Mode Allows the system to conserve power while in hibernate mode.
l On (default)
l Off
Suspend Type Specifies the power state in suspend mode.
l S1(POS)
l S3(STR) (default)
Boot
NOTE: The items displayed are dynamically updated according to the devices detected
Fast Boot Speeds up the boot process by bypassing some compatibility steps.
l Off
l On (default)
Numlock Key Turns on or off the Numlock.
l Off
l On (default)
Wait for "F1" if error Waits for the F1 key to be pressed when an error occurs.
l Enabled (default)
l Disabled
Post Hot Keys Specifies the post hot key messages to be displayed.
l Setup and Boot Menu
l Setup
l Boot Menu
l None
1st Boot Device Specifies the first boot device.
2nd Boot Device Specifies the second boot device.
3rd Boot Device Specified the third boot device.
4th Boot Device Specifies the fourth boot device.
Exit