Dell Dimension 3100C - Manual (Page 44)

44
Advanced Troubleshooting
www
.dell.com | support.dell.com
A possible graphics failure has occurred. If the problem persists, contact Dell (see
page 102).
A possible floppy drive or hard drive failure has
occurred. Reseat all power and data cables and restart
the computer.
A possible USB failure has occurred. Reinstall all USB devices, check cable
connections, and then restart the computer.
No memory modules are detected. • If you have two or more memory modules
installed, remove the modules, reinstall one
module (see page 64), and then restart the
computer. If the computer starts normally,
reinstall an additional module. Continue
until you have identified a faulty module or
reinstalled all modules without error.
• If available, install properly working memory
of the same type into your computer (see
page 64).
• If the problem persists, contact Dell (see
page 102).
Memory modules are detected, but a memory
configuration or compatibility error exists. • Ensure that no special memory
module/memory connector placement
requirements exist (see page 62).
• Verify that the memory modules that you are
installing are compatible with your computer
(see page 62).
• If the problem persists, contact Dell (see
page 102).
Light Pattern Problem Description Suggested Resolution