Dell PowerVault NX3000 - Manual (Page 12)

• TCP port = 137: NetBIOS TCP
• TCP port = 139: NetBIOS Session
Service:
• TCP port = 445: SMB over TCP
• TCP port = 3389: Remote Desktop
• TCP port = 2463:
•
Workaround/Solution This feature is working as designed.
PowerVault NAS Initial Configuration Wizard Does Not Install Non-
English Languages
Description The PowerVault NAS Initial Configuration Wizard does not successfully install the language on the
system. An error occurs while installing the non-English language packs.
Workaround/
Solution Perform the following steps to reinstall the language packs:
1. Click Start → Control Panel → Clock, Language, and Region → Change Display Language.
The Regional and Language Options window appears.
2. From the Keyboards and Languages tab, select Install/Uninstall Languages to install the
required language.
3. Select Install Language and browse to C:\dell\mui\ where the MUI files
are located.
Continuous Launch Of The PowerVault NAS Initial Configuration
Wizard
Description The PowerVault NAS Initial Configuration Wizard experiences a continuous launching error after an
unsuccessful attempt at installing a non-English language pack.
Workaround/
Solution Perform the following steps to reinstall the language packs:
1. Click Start → Control Panel → Clock, Language, and Region → Change Display Language.
The Regional and Language Options window appears.
2. From the Keyboards and Languages tab, select Install/Uninstall Languages to install the
required language.
3. Select Install Language and browse to C:\dell\mui\ where the MUI files
are located.
12