Dell UPS 5600R - Manual (Page 47)

47 Operation
|
Transferring the UPS Between Modes
Transferring between modes includes:
S
Transferring from Normal to Bypass mode
S
Transferring from Bypass to Normal mode
Transferring from Normal to Bypass Mode
To transfer from Normal to Bypass mode:
1 Press the button for longer than one second to go to the main menu selection and scroll down to
the Control menu using the button.
2 Press the button to enter the Control menu.
3 Select Go to Bypass.
The text on the screen changes to Manual Bypass Command Sent. The Bypass mode icon
flashes, indicating Bypass mode.
Transferring from Bypass to Normal Mode
To transfer from Bypass to Normal mode:
1 Press the button for longer than one second to go to the main menu selection and scroll down to
the Control menu using the button.
2 Press the button to enter the Control menu.
3 Select Go to Normal.
The text on the screen changes to Normal Command Sent. The Normal mode icon flashes,
indicating Normal mode.
Retrieving the Event Log
To retrieve the Event Log:
1 Press the button for longer than one second to go to the main menu selection and scroll down to
the Event Log menu using the button.
2 Press the button to enter the Event Log list.
3 Scroll through the listed events, notices, and alarms using either the button or the button.