Rack kit contents – Dell PowerVault 210S (SCSI) User Manual
Page 15
support.dell.com
Dell PowerVault 200S and 210S Storage Systems Rack Installation Guide
1-1
This document provides instructions for trained service technicians installing Dell
PowerVault 200S and 210S storage systems in a Dell rack. For information on the
stand-alone configuration, see your Installation and Service Guide.
A rack installation kit is available from Dell for installing one or more storage systems
in a Dell rack or other racks that meet the requirements of ANSI/EIA-310-D-92, Inter-
national Electrotechnical Commission (IEC) 297, and Deutsche Industrie Norm (DIN)
41494. One rack kit is required for each storage system that you install in the rack.
" #
The rack kit includes the following items (see Figure 1-1).
NOTE: Some parts may be preinstalled if you ordered a rack-mounted system.
Eight 10-32 x 1/2-inch Phillips flat-head screws
Four 10-32 x 1/2-inch Phillips pan-head screws
Four 6-32 x 3/8-inch Phillips flat-head screws
Eight conical metal washers
Two adjustable rail-mounting flanges (a pair)
Two mounting ears (a pair)
Two support rails (a pair)