Dell OptiPlex GX1 - Manual (Page 18)

Removing and Replacing Parts: Dell OptiPlex GX1 Systems Service Manual
file:///C|/infodev/2013/eDoc/OpGX1/SM/remsff.htm[2/21/2013 11:45:32 AM]
4 PCI expansion slot 2 (PCI2)
The chassis has a PCI riser board that has two PCI expansion-card connectors (see Figure 20).
To remove the PCI riser board, perform the following steps:
1. Remove the expansion-card cage.
2. Remove the expansion cards installed in the slots.
3. Remove the screws securing the riser board to the expansion-card cage.
4. Lift the riser board off the expansion card cage.
System Board Components
The subsections that follow contain procedures for removing system board components, which are shown in
Figure 21.
Figure 21. System Board Components