Dell Vostro 400 (Mid 2007) - Manual (Page 75)

Solving Problems
75
Printer Problems
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTE:
If you need technical assistance for your printer, contact the printer’s
manufacturer.
I F THE POWER LIGHT IS BLINKING AMBER — The computer is receiving electrical
power, a device might be malfunctioning or incorrectly installed.
• Remove and then reinstall the memory modules (see "DC Power Connector P8" on
page 111).
• Remove and then reinstall any cards (see "Cards" on page 116).
• Remove and then reinstall the graphics card, if applicable (see "Removing a
PCI/PCI Express Card" on page 121).
E LIMINATE INTERFERENCE — Some possible causes of interference are:
• Power, keyboard, and mouse extension cables
• Too many devices on a power strip
• Multiple power strips connected to the same electrical outlet
C HECK THE PRINTER DOCUMENTATION — See the printer documentation for
setup and troubleshooting information.
E NSURE THAT THE PRINTER IS TURNED ON
C HECK THE PRINTER CABLE CONNECTIONS —
• See the printer documentation for cable connection information.
• Ensure that the printer cables are securely connected to the printer and the
computer (see "Setting Up a Printer" on page 24).
T EST THE ELECTRICAL OUTLET — Ensure that the electrical outlet is working by
testing it with another device, such as a lamp.