beautypg.com

Attaching the rack-adapter plate – Dell PowerEdge 1800 User Manual

Page 10

background image

8

Installing the Tower-to-Rack and Rack-to-Tower Kits

www

.dell.com | support.dell.com

Figure 1-3.

Removing the System Stabilizer Feet

Attaching the Rack-Adapter Plate

1

Remove the system’s right-side cover:

a

Remove the two back-panel screws that secure the right-side cover to the chassis. See
Figure 1-4.

b

Slide the right-side cover toward the back of the system and then lift it away from the
chassis.

system stabilizer feet (4)

securing screws (4)

P2648bk0.book Page 8 Thursday, October 14, 2004 11:18 AM

See also other documents in the category Dell Computer hardware: