Fans, Removing the microprocessor fan, Removing the video card fan – Dell Latitude D810 User Manual
Page 22
Back to Contents Page
Fans
Dell™ Latitude™ D810 Service Manual
Removing the Microprocessor Fan
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
display assembly
.
3.
Remove the
keyboard
.
4.
Remove the
palm rest
.
5.
Remove the M2.5 x 5-mm screw from the top left corner of the fan.
6.
Disconnect the fan cable connector.
7.
Lift the fan straight up out of the computer.
Removing the Video Card Fan
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
display assembly
.
3.
Remove the
keyboard
.
4.
Remove the
palm rest
.
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
M2.5 x 5-mm screw
2
fan cable connector