Modem, Removing the modem – Dell Inspiron 9400 User Manual
Page 37
Back to Contents Page
Modem
Dell™ Inspiron™ 9400 Service Manual
Removing the Modem
1.
Follow the instructions in
Before Working Inside Your Computer
.
2.
Turn the computer upside down, loosen the two captive screws on the modem cover, and remove the cover from the computer.
3.
Remove the M2 x 3-mm screw that attaches the modem to the system board.
4.
Pull up on the pull-tab to disconnect the modem from the connector on the system board.
5.
Disconnect the modem cable from the modem.
CAUTION:
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
1
system board connector
2
M2 x 3-mm screw
3
pull-tab
4
modem
5
modem cable
NOTICE:
Do not disconnect the modem cable from the system board.