Dell Inspiron 11 3148 - Manual (Page 75)

Replacing the Windows-
Button Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw hole on the Windows-button board with the screw hole
on the display bezel.
2 Replace the screw that secures the Windows-button board to the display
bezel.
3 Slide the Windows-button board cable and the touch-board cable into
the connectors on Windows-button board and press down the latches to
secure the cables.
4 Adhere the adhesive tape to the connector on the Windows-button
board to secure the cable.
5 Turn the display-panel assembly over.
Post-requisites
1 Replace the display back-cover and antenna assembly .
2 Replace the display assembly .
3 Replace the battery .
4 Replace the base cover .
75