Dell Inspiron 11 3148 - Manual (Page 73)

Removing the Windows-
Button Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover .
2 Remove the battery .
3 Remove the display assembly .
4 Remove the display back-cover and antenna assembly .
Procedure
CAUTION: Place the display-panel assembly on a soft and clean
surface to avoid scratching the display.
1 Place the display-panel assembly face down on a flat surface.
2 Peel off the adhesive tape to access the Windows-button board cable.
3 Lift the connector latches and disconnect the Windows-button board
cable and the touch-board cable from the Windows-button board.
4 Remove the screw that secures the Windows-button board to the display
bezel.
73