Dell PowerVault 745N - Manual (Page 18)

System Features
l 1-U rack-mountable chassis.
l Intel ® Pentium ® 4 processor with a speed of at least 2.8 GHz and a front-side bus speed of 800 MHz, Intel Celeron ® processor with a speed of at
least 3.4 GHz and a front-side bus speed of 800 MHz, or an Intel Celeron processor with a speed of at least 2.4 GHz and a front-side bus speed of 400
MHz.
l Support for software RAID, hardware RAID on the system, and hardware RAID on external storage systems.
l A minimum of 512 MB of PC-3200 DDR400 SDRAM memory, upgradable to a maximum of 4 GB by installing memory modules in the four memory module
sockets on the system board.
l One 64-bit, 66-MHz 3.3 V PCI-X expansion slot and one 32-bit, 33-MHz 5 V PCI expansion slot. Both slots support full-height, half-length cards.
l Optional daughter card drive controller supports up to four SATA hard drives.
l Optional 39160 SCSI card for tape backup.
l Optional external SCSI RAID solutions.
l Optional SATA RAID solutions.
l Optional remote access controller for remote systems management.
l One 280 W power supply.
l Two integrated Gigabit Ethernet network adapters, capable of supporting 10-Mbps, 100-Mbps, and 1000-Mbps data rates.
l Three system cooling fans and two power-supply cooling fans.
l Serial connector for console redirection support.
l Security features, including chassis intrusion detection.
l Systems management circuitry that monitors critical system voltages and temperatures. The systems management circuitry works with the systems
management software.
For more information about specific features, see " Technical Specifications ."
Software Features
l Microsoft® Windows® Storage Server 2003, Standard Edition
l Services for UNIX ® , Novell ® NetWare ® , and Macintosh (integrated on the operating system)
l Protocol support for TCP/IP, DHCP (client support), DNS (client support), NIS (client support), IPX, and AppleTalk
l Disk management through Dell OpenManage™ Array Manager
l Shadow Copies snapshot software
l Diagnostics for evaluating your system's components and devices. For additional informatin about using the system diagnostics, see your Installation