Canon SUPER G3 FAX L900 - Manual (Page 10)

9
V SENDING TO MORE THAN ONE LOCATION
(SEQUENTIAL BROADCASTING)
A. USING ONE-TOUCH / CODED SPEED DIAL
1.
Place documents face down on the fax
2. Press all the relevant one-touch / coded-dial numbers one right after
another
3. Press START/SCAN
4. Take note of “ TX / RX ” number
B. MANUAL DIALING FROM THE NUMERIC 10-KEY PAD
1. Place documents face down on the fax
2. Enter one fax number
3. Press SET
4. Continue steps 2. & 3. until all the fax numbers (maximum 10
destinations) have been entered
5. Press START/SCAN
6. Take note of “ TX / RX ” number
C. COMBINATION OF (A) & (B)
If some destinations are from auto-dialers and some are not, follow
steps A.1. & A.2. then B.2. to B.6.
N.B. Please check on the MULTI TRANSACTION REPORT which
will be generated out after the broadcast is completed to ensure that
the broadcast is successful.