Dell Vostro 270s (Late 2012) - Manual (Page 8)

Installing the Cover
1. Align the cover along its tabs on the chassis and slide the cover to its original position.
2. Tighten the screws to secure the cover to the computer.
3. Follow the procedures in After Working Inside Your Computer .
Removing the Front Bezel
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the cover.
3. Pry the front panel retention clips away from the chassis located at the edge of front bezel.
4. Rotate the front bezel away from the computer to release the hooks on the opposite edge of the bezel from the
chassis.
8