Dell Precision 620 - Manual

Dell™ Precision™ WorkStation 620 Systems Service Manual
Model WCP
Information in this document is subject to change without notice.
© 2000 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.
Trademarks used in this text: Dell Precision and the DELL logo are trademarks of Dell Computer Corporation; Microsoft and Windows NT are registered trademarks of
Microsoft Corporation; Intel and Pentium are registered trademarks and Xeon is a trademark of Intel Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation
disclaims any proprietary interest in trademarks and trade names other than its own.
Initial release: 8 Feb 2000
Last revised: 26 Oct 2000
Removing and Replacing Parts
NOTE: You can obtain the latest version of this document from the Support section of the Dell Web site at http://www.dell.com.
Notes, Notices, and Cautions
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, notices,
and cautions, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your system.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
CAUTION: A CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.