Palm rest bracket, Removing the palm rest bracket – Dell Inspiron Mini 10v (1011, Mid 2009) User Manual
Page 31
Back to Contents Page
Palm Rest Bracket
Dell™ Inspiron™ 1011 Service Manual
Removing the Palm Rest Bracket
Replacing the Palm Rest Bracket
Removing the Palm Rest Bracket
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the palm rest (see
Removing the Palm Rest
).
5.
Remove the hard drive (see
Removing the Hard Drive
).
6.
Remove the five screws that secure the palm rest bracket to the computer base.
7.
Turn the computer over and open the display.
8.
Remove the four screws that secure the palm rest bracket.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.