Dell UPS 4200R - Manual (Page 83)

83 Operation and Maintenance |
S
Set Ethernet speed: To change the network speed (see Figure 43). Restart the card to activate the
new parameters.
Set the Ethernet speed : [1 : Automatic, 2 : 10 MBit]
1
New Ethernet speed : Automatic
Wait while the new setting is saved.
Reset the card to enable the new configuration.
Figure 43. Ethernet Speed Settings
Option 3: Set Login Password to Default
Select menu item 3 to return the password to the default (admin). Wait for the confirmation message
(see Figure 44). The card is now accessible using the Web with the default password admin, but you
must restart the card to save the new password.
Login Password has successfully been set
Figure 44. Default Password Confirmation Message