Configuring an ip phone service – Cisco 7940 User Manual
Page 3
91-3
Cisco Unified Communications Manager Administration Guide
OL-14495-01
Chapter 91 IP Phone Services Configuration
Configuring an IP Phone Service
Configuring an IP Phone Service
Perform the following steps to add or update an IP phone service.
Caution
Do not put IP phone services on any Cisco Unified Communications Manager server at your site or any
server that is associated with Cisco Unified Communications Manager, such as the TFTP server or
directory database publisher server. This precaution eliminates the possibility that errors in an IP phone
service application will have an impact on Cisco Unified Communications Manager performance or
interrupt call-processing services.
Procedure
Step 1
Choose Device >Device Settings > Phone Services.
The Find and List IP Phone Services window displays.
Step 2
Perform one of the followings tasks:
•
To add an IP phone service, click the Add New button. The IP phone services Configuration window
displays. Continue with
•
To update an existing IP phone service (for example, to change the service URL or other
information), locate the appropriate IP phone service as described in
. Click the name of the IP phone service that you want to update and continue
with
Step 3
Enter the appropriate settings as described in
.
Step 4
Click Save.
You can add, update, or delete parameters as needed as described in
“Configuring an IP Phone Service
Parameter” section on page 91-5
and
“Deleting an IP Phone Service Parameter” section on page 91-7
Step 5
To apply the changes, update the IP phone services Configuration window:
•
If the service was modified after subscriptions existed, click Update Subscriptions to rebuild all
user subscriptions. You must update subscriptions if you changed the service URL, removed a phone
service parameter, or changed the Parameter Name for a phone service parameter.
Note
If you change the service URL, remove an IP phone service parameter, or change the name
of a phone service parameter for a phone service to which users are subscribed, be sure to
click Update Subscriptions to update all currently subscribed users with the changes. If you
do not do so, users must resubscribe to the service to rebuild the URL correctly.
•
If the service is new and you do not need to rebuild user subscriptions, click Save.
Additional Information
See the