Dell LCD TV W2606C - Manual (Page 29)

Using the TV Menu 29
FILE LOCATION: F:\OEM MODELS\DELL LCD TV\26 TV Monitor\W2606C DAO_OM\09-20-2005\W2606C DAO_OM\W2606C DAO
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 9 / 2 0/ 0 5 – F O R PR O O F O N LY
Setting Your Cable Channels
Your TV is set to automatically detect
whether you are using an antenna or cable
and then set the available channels. Some
cable providers use an older cable standard
that the TV can not automatically detect.
If you have your TV connected but can
only view channels 5 and 6, complete the
following steps:
1 Press the Menu button, the remote
control, or TV and enter the TV
Menu.
2 Select Setup and then select Channel Setup.
3 In Channel Setup, select Antenna/Cable, and then toggle to Cable.
4 If selecting Cable does not resolve the issue, repeat steps 1 through step 3 using each available
Channel Setup option (HRC, IRC, and Antenna) until you can view all channels.
Sleep Timer
Sleep Timer allows you to select an increment of time after which the LCD TV display turns off
automatically. You can select from 10 minutes to 3 hours.
Closed Caption
In the Closed Caption menu, you can
select On, Off, or Mute. If you select
Mute, CC automatically displays when
you use the Mute button on the remote
control.
You can choose from the following
Caption modes:
•CC1 through CC4 and TXT1 through
TXT4 (CC1, CC2, and CC4 offer
standard C1osed Captioning and CC3
provides closed captioning in a secondary
language.)
• CC Mute (automatically turns CC on when you mute the TV volume)
BACK
CLOSED CAPTION
CAPTION MODE
CLOSED CAPTION
ON
CC1